Motor:
3 1/4 HP Soft start.
Speed:
8,000 - 21,000 RPM.
Speed maintenance under load
Collet:
½" and ¼" reducer
Depth:
1. Winder handle rack and pinion adjustment
2. Micro winder
3. Conventional “free” plunge
Bit changes:
Through-base, single wrench action. Auto shaft lock.
Warranty:
3 Years
FAQ's for the 3 1/4 HP Plunge Router
Frequently Asked Questions » FAQ's for the 3 1/4 HP Plunge Router
All Frequently asked questions for the 3 1/4 HP Plunge Router are displayed below.
Question: Why won't the collet lock engage?
Answer: 1. The router switch is in the "on" position. Switch it "off" and ensure the shutter has closed. Or ...
2. The depth stop rod is not fully retracted. Loosen the depth stop lock and retract the depth stop fully, then re-tighten.
Question: Why can't I refit the Plunge Spring?
Answer: Is the router locked at the top of its' plunge travel (base is furthest away from the motor)?
During operation without the plunge spring fitted the rod inside the plunge cap may have dropped into the spring housing. With the plunge cap removed turn the router upside down to retrive the rod. Insert the spring then refit the rod and cap.
Question: Why can't I retract the shutter and turn the Router on?
Answer: Ensure that the router is disengaged from its' collet lock (full depth) position.
Ask us a Question
If you have any query, which has not been addressed on this database, please contact Triton for assistance.